Isolator Switch

Product Description Product name: High voltage isolation switch Outdoor Single Pole Fuse,known as the isolation switch,can only be disconnected small current, normally only disconnect racing circuit, the circuit has a clear break point, often used with circuit breaker, disconnecting switch is...

This high voltage isolation switch is a single-pole switching device, featuring a clearly visible disconnecting path, which is easy to operate and intended to be used in outdoor MV overhead power distribution networks.

FN3 12KV Indoor electric power Load Break Switchs with operating mechanism is a kind of AC 50Hz three phase isolator switch, applied in 12KV rated voltage power system which used to closing current in normal circumstances.

400A isolation switch is one of GW1 type outdoor high voltage isolation switch, it's AC 50Hz/60Hz outdoor device, is used in below 33 kv the supply network, for high voltage line and under the situation with voltage

40.5KV isolation switch is one of GW4 Series Outdoor high-voltage isolation switch is a three-phase AC 50Hz outdoor high-voltage electrical appliances, power system 40.5KV rated voltage

GW13 type of load break isolation switch is alternating current 50Hz outdoor electric equipment. In the event of the no bearing, it used as the transformer neutral point to connect the ground.

GW5 type of high voltage load switch is one of the most commonly used equipment in the power system, the main role is to high voltage isolation in equipment or line maintenance, to ensure the safety of.

GW7 Series AC isolator switch shall be applied to switching of the HV transmission equipment with rated frequency 50Hz when no load is applied to the HV line and electric isolation of the HV electric equipments, such as the HV bus, the breaker, etc. to be overhauled from the charged HV circuit.

FN5 Model indoor AC HV load break switch-fuse combination apparatus is developed and designed based on international technology and national power supply requirement, it passes all type tests and trial-operation inspections.

FN7 series indoor isolation switch is a new type of gas production type indoor HV load switch, applicable to AC 50 Hz, three phase AC power system with rated voltage of 12KV, the breaking load current and close short circuit current use.

FZN25 630A isolation switch is suitable for three-phase AC, 50Hz, 12KV power supply network, as the breaking load current and closing short-circuit current.

FKN12 indoor High Voltage isolation switch is a new series of switches and equipment developed by our company. It is suitable for 12KV and below three-phase power distribution system, as transformer, cable and overhead.

FZN21 Indoor High Voltage load switch fuse combination units appliances for three phase AC 12kV, 50Hz power system, or with the complete power distribution equipment and loop-network switch cabinet